1 thought on “How to inlay the emerald ring itself”
Marcus
Emerald inlaid processing process 1. Design: Jewelry designer draws out the style image in the concept to the superb jewelry master to complete their works. 2. Starting board: using hand -made methods to create jewelry models, and welded on its appropriate position to ensure that the water -mounted rods that are smoothly irrigated into the metal liquid during casting can be used as a model for casting. 3. Pressure: Use rubber sheet to clamp the jewelry model in it, stuff the raw film into a pre -selected aluminum frame, and fill the suppressed sample full of fragmented film. , Cut the film with a certain technical rule with a surgery knife, and take out the jewelry model to make the so -called glue mold. 4. Installation: First fix the wax trees in the cast cage, put it on the vacuum machine to pump the vacuum, remove it and pour it into the casting cage, then passes through the steamed wax, bake it in the oven, and gradually heat up. The process can be completed into a gypsum mold. The metal material and the mouth are heated in the melting gold furnace. When the alloy is completely melted and stirred, the gold water is cast into the gypsum of the vacuum or centrifugal casting machine. 5. Perseverance: Perseverance refers to the process of carefully repaired the rough of the jewelry. 6. Stone inlaid: After the model is executed, the whole process of jewelry processing can be completed by the same plazing, polishing, cleaning, typing, and sandblasting by the same craftsmanship. 7. Polishing: The surface of the jewelry after polishing should be extremely bright, giving people a glorious beauty. 8. Electric gold: Plashing Platinum water to electroplating the surface of the jewelry to make the surface of the jewelry whiter and shiny. The is a piece of emerald ring. The production is completed. Its beauty is inseparable from the hard work of many designers and craftsmen behind it. Its value requires a quiet taste and appreciation.
Emerald inlaid processing process
1. Design: Jewelry designer draws out the style image in the concept to the superb jewelry master to complete their works.
2. Starting board: using hand -made methods to create jewelry models, and welded on its appropriate position to ensure that the water -mounted rods that are smoothly irrigated into the metal liquid during casting can be used as a model for casting.
3. Pressure: Use rubber sheet to clamp the jewelry model in it, stuff the raw film into a pre -selected aluminum frame, and fill the suppressed sample full of fragmented film. , Cut the film with a certain technical rule with a surgery knife, and take out the jewelry model to make the so -called glue mold.
4. Installation: First fix the wax trees in the cast cage, put it on the vacuum machine to pump the vacuum, remove it and pour it into the casting cage, then passes through the steamed wax, bake it in the oven, and gradually heat up. The process can be completed into a gypsum mold. The metal material and the mouth are heated in the melting gold furnace. When the alloy is completely melted and stirred, the gold water is cast into the gypsum of the vacuum or centrifugal casting machine.
5. Perseverance: Perseverance refers to the process of carefully repaired the rough of the jewelry.
6. Stone inlaid: After the model is executed, the whole process of jewelry processing can be completed by the same plazing, polishing, cleaning, typing, and sandblasting by the same craftsmanship.
7. Polishing: The surface of the jewelry after polishing should be extremely bright, giving people a glorious beauty.
8. Electric gold:
Plashing Platinum water to electroplating the surface of the jewelry to make the surface of the jewelry whiter and shiny.
The is a piece of emerald ring. The production is completed. Its beauty is inseparable from the hard work of many designers and craftsmen behind it. Its value requires a quiet taste and appreciation.